Flowrox™ product and service offering

Flowrox valves

We provide pinch and slurry knife gate valves for flow control. Flowrox™ pinch valves can be either used for shut-off (also known as isolation) or control. Every Flowrox valve is fit for the most demanding applications in which conventional ones encounter problems with wear due to increased turbulence. When the controlled flow is abrasive, it is a big advantage to have only one, wear-resistant, valve part in contact with the medium. The need for maintenance and spare parts is reduced. We provide tailor-made valves for flow control solutions precisely according to given specifications.

Flowrox™ heavy duty pinch valves

Flowrox PV, PVE and PVE/S heavy duty pinch valves are designed for shut off and control applications involving abrasive or corrosive slurries, powders or granular substances. In the open position, the valve is full bore with no flow restrictions. During closing, two pinch bars squeeze the valve sleeve shut on the center line. Bubble tight shut-off is provided even if solids have built up on the sleeve wall.

Flowrox™ PVG and PVEG pinch valves

Flowrox PVG and PVEG pinch valves are robust and cost effective with simple, single-sided closing mechanism. PVG valve has a strong valve body and opening tags in the sleeve as a standard. PVEG valve has a corrosion resistant and light-weight plastic body. Through the reliability and structure, both kinds of valves offer substantial savings based on improved performance, long service lifetime and low total cost of ownership. Flowrox PVG and PVEG valves are ideal for low cycle applications involv...

Flowrox™ slurry knife gate valves

Heavy duty slurry knife gate valve isolates flow even in the most demanding process conditions. The bi-directional flow tolerates backflow and elastomer sleeves on both sides of the gate provide tight shut off. Flowrox knife gate valve follows the concept of the ease of maintenance. The valve body is cast in one piece which eliminates the need for sealing between the body halves. Load distribution ring is integrated into the valve sleeves. The valve contains only two service parts; ring sleeves ...

Flowrox industrial pumps serve a wide range of process industries. Peristaltic hose pumps and progressive cavity pumps are specifically designed for demanding processes involving abrasive, corrosive, highly viscous or crystallizing media with high solids content. Flowrox peristaltic hose pumps are installed worldwide in numerous slurry applications, as well as progressive cavity pumps in paste pumping applications.

Flowrox™ LPP-T transfer pumps

Flowrox LPP-T transfer pumps incorporate advanced single roller design which eliminates friction and lowers energy consumption. They are ideal for pumping various slurries and dosing a wide range of abrasive, corrosive, viscous or crystallizing media.

Flowrox™ LPP-D dosing pumps

Flowrox LPP-D peristaltic pumps are ideal for dosing and flow control. They provide accurate dosing in all process conditions as the pump discharge flow does not depend on the pipeline pressure. There is no variation due to the discharge pressure condition, output remains the same on every cycle.

Flowrox™ Expulse™ pulsation dampener

Flowrox Expulse pulsation dampener has an important job to minimize pulsation distractions, a common issue with several types of positive displacement pumps. Pulsations can result in annoying noise and vibrations in the process pipeline, which can potentially lead to breakages over time.

Flowrox™ progressive cavity pumps: E-, EL- and D-series

Flowrox PC pumps are ideal for challenging applications with high viscous, corrosive or abrasive media. E-series is ideal for the most demanding industrial slurry and paste pumping applications. EL-series excels in demanding wastewater and municipal waste applications, whereas D-series is designed for chemical and flocculant dosing applications.

Flowrox™ FXM metering pumps

Flowrox™ FXM metering pump is ideal for chemical dosing applications which require accurate metering. To optimise metering performance, we offer FXM2 and FXM3 series pumps with improved performance.

Insights

We manufacture and deliver original spare parts and components to all Flowrox hose pumps, progressive cavity pumps, valves and knife gate valves. Original and compatible replacement components to other brands of pumps and valves are also available through us.

We manufacture the spare parts ourselves, guaranteeing quality and availability. Flowrox spare parts are manufactured according to the highest quality standards with more than 20 years of experience.

Spare parts for Flowrox™ pumps

We offer a wide selection of spare parts for our own peristaltic pumps (hoses, tubes, etc). We also manufacture and deliver spare parts for all PC (progressive cavity) pumps - stators, rotors, drive shafts, coupling rods, joint assemblies, bearings sets and sealings.

Spare parts for Flowrox™ valves

We manufacture and deliver high-quality spare parts for all Flowrox™ valves. Genuine parts ensure that they are certified and specifically suited for your process. Elastic sleeve is the core of the FlowroxTM valve. It is the only part in contact with the process medium.

Valve maintenance and repairs

All valves must be repaired at some point. Incorrect repairs or the use of inferior parts create safety risks. That’s why being your reliability partner means we carefully plan maintenance and only use original spare parts to reduce the number of unexpected production breaks and failures. Quality repairs using original spare parts ensure that your valves meet their original specifications after maintenance and will reach their maximum lifetime.

Flowrox industries

Mining, metals and steel

Valmet's flow control and automation solutions are a reliable choice for mining, metals and steel industries.

Flow control for energy

Facing increasing pressures to keep your power generating process up to code? Reliable valves and pumps help improve the productivity of your energy plant. We offer reliable valves, pumps and services for the energy industry.

Construction industry

Valmet offers a range of heavy-duty flow control solutions for cement handling in the construction industry, as well as automation solutions that improve process control and reliability.

Flow control for pulp, paper, board and tissue

Valves and flow control play a vital part in pulp, paper, board and tissue production. The rapidly evolving industry is being reinvented to help create profitable and sustainable success. Through progressive thinking, creative design and solid manufacturing expertise, we are helping drive increasingly intelligent processes towards improved efficiency, reliability and environmental performance. Valmet has been a pioneer in the paper business since the very beginning, which is why today most of th...

Water and wastewater

Valmet provides flow control and automation solutions for the water and wastewater industry, ensuring safe, reliable operations and cost savings.

Chemical industry

Valmet has wide experience in flow control and automation solutions for the chemical industry. We cover the entire life cycle of processes, including new installations, rebuilds and services.

Technologies, automation solutions and services for marine

Flow control for offshore

In harsh environments it’s critical to have valves, pumps and flow control services that ensure the safety and efficiency of the rig.

Downloads

Complete solutions for process industries

We specialize in flow control solutions for process industries. Flowrox™ valves and pumps are known for quality within the mining and metals industry. Our goal is to provide excellent service close to customers. For us, improving our customers’ process performance is crucial, and we want to do it in close cooperation with them. We help discover most efficient technologies and offer long-term solutions for our customers. Our professional global services ensure optimal and trouble-free operations.

Flowrox, formerly known as Larox Flowsys, has more than 45 years of experience operating within heavy industries. It started in 1977 when a company Larox was founded. Larox manufactured pressure filters and pinch valves for demanding conditions. Later on, pinch valve product line separated to its own company: Larox Flowsys. In 2011, Larox Flowsys renamed to Flowrox. In 2021, Neles acquired the valve and pump businesses of Flowrox. As of April 1, 2022 Neles is a Flow Control business line in Valmet.

We have ISO9001:2015 Quality and ISO14001:2015 Environment multisite certificates.

Flowrox™ product and service offering

Pumps and valves for flow control